YSV-2M
Manual PCB Separator Feature：
● Circular blade cuts against linear blade to ensure clean, burr-free processing
without board stress.
● Quick-lock blade for easy board thickness setup,the distance between upper
round cutter and lower straight cutter can be adjusted precisely.
● Back bench height can be adjusted upwards and downwards to support the
PCB or tilted so that PCBs fall away from blade.
● Hardened tooled steel long-life blades.
Specification:
| Model No: | YSV-2M |
| Machine Dimension: | 820*390*360 mm |
| Maximum Length of Cutting: | 330 mm |
| Cutting Speed: | 0-1000mm / s |
| Cutting Thickness: | 0.8-3.5mm |
| Depaneling Mode | Manual |
| Optional configuration: | Circular blade and linear blade * 1set |
| Weight | 50kg |
Features： 1.linear knife, manually cutting against up circular knife,for reduce stress.
2.eparate pre-scored PCB assembly without stress on either PCB or component .
3.Separating speed is adjusted by a rotary knob "
4.Handle Intermittent scoring or cut-outs
5.Board with projected component can be cut precisely "
6.Large stainless steel platform on both side of cutting blade prevents board wobble and table height and angle."
7.Clearance between circular and linear blades are adjustable to fit different groove depth and compensates for blade wear out ."
PCB Depaneling of PCB Boards YSV-2M
features:
1.Use upper circular blade and bottom linear blade.
2.Cut pre-scored v groove PCB without stress on either PCB or component.
3.Clearance between circular and linear blades are adjustable to fit different groove depth and compensates for blade wear out.
4.Blades can be re-grinded to use.
Application: Aluminum base board.
copper substrate.
FR4, pcb board.
glass fiber board.
Maintenance:
Take off the power botton and clean the machine after finish working
Be careful to protect the upper and lower blade
Move the blades and protect them with machine oil
Check the screw fastening time to time
